Moving the new fork lift batteries
-
- Posts: 2
- Joined: Thu Apr 17, 2014 10:54 am
Moving the new fork lift batteries
My husband I have been watching your struggles with moving those batteries closer to your tiny house. Have you considered using lengths of logs maybe 6 inches in diameter and making a crate around the batteries & then u could roll pushy them along the rollers? Just an idea.
Re: Moving the new fork lift batteries
I had considered using logs, yes but it sure would have been a task. And dangerous because the battery is very tall and top heavy. It would have required three guys to do it safely anyway to ensure it would not tip over.
Re: Moving the new fork lift batteries
The way you did it worked out just fine.
Re: Moving the new fork lift batteries
I watched the vid today about solar panel placement and the fork lift batteries. I'm wondering if temp is related to specific gravity? Perhaps he can charge them all winter and they will not get any better than FAIR. Perhaps a better approach would be to just use them and that would be better in the long run?
Re: Moving the new fork lift batteries
I fear you may be right. The batteries are always at a low capacity it seems. I dont dare use them though until they are fully topped off properly
Re: Moving the new fork lift batteries
Hey Troy, have you thought about using snow to insulate tour batteries?
heres an awesome resource Troy
http://www.freesunpower.com/chargecontrollers.php" onclick="window.open(this.href);return false;
o yea, and does your charge controller have a battery temp sensor? higer end charge controllers use the battery tep to adjust the charge settings.
heres an awesome resource Troy
http://www.freesunpower.com/chargecontrollers.php" onclick="window.open(this.href);return false;
o yea, and does your charge controller have a battery temp sensor? higer end charge controllers use the battery tep to adjust the charge settings.
Re: Moving the new fork lift batteries
Snow is a temporary thing and the moisture could slowly damage the metal casing on the battery. I have fully insulated it for now with used fiberglass insulation I got for free in summer.
I will build a proper housing for it when the snow melts off my wood.
Yes my MPPT solar charge controller has both temperature and voltage sensors on it. They are now both properly connected as well.
I will build a proper housing for it when the snow melts off my wood.
Yes my MPPT solar charge controller has both temperature and voltage sensors on it. They are now both properly connected as well.