All,
I want to buy a 'reel' of LED strips(seen them on Ebay. they come in a roll). They say they can be cut to length, but how do you use the rest of the 'roll'? You would need to be able to put a connector on the strip to provide power?
Or are you just supposed to throw the rest away?
Am I missing something here?
Alan
Confusion with LED strips
-
- Posts: 63
- Joined: Sat Jun 15, 2013 12:36 pm
- Location: Brielle , west coast of holland(europe)
Re: Confusion with LED strips
the left over strip can be used after resoldering new leads on it (you have to cut it in marked sections to do so.salan3 wrote:All,
I want to buy a 'reel' of LED strips(seen them on Ebay. they come in a roll). They say they can be cut to length, but how do you use the rest of the 'roll'? You would need to be able to put a connector on the strip to provide power?
Or are you just supposed to throw the rest away?
Am I missing something here?
Alan
beware that the led strip drawes fair amound of amps, not realy suited for use as main lighting in off grid situations.
Regards Mr Bugsier 5
dont be afraid to ask!, a stupid question does not exist!
forgive me my bad English!, as long as you know what i mean it,s fine for me!
(you thry dutch, wont be easy to! HA HA!)
forgive me my bad English!, as long as you know what i mean it,s fine for me!
(you thry dutch, wont be easy to! HA HA!)
Re: Confusion with LED strips
Got that right. I use them as accent lighting in the tiny home but they do draw a bit of power. I think about that when I use my indirect LED lighting in my tiny house.
I got this online. It is an average.
If your LED light strip has 30 LEDs per meter (yard) then it uses about 7 watts per meter (yard)
If it has 60 LEDs per meter then double that = 14.
120 LEDs per meter then again double that = 28.
A 15 foot LED light strip is about 5 yards so it uses about 35 watts of power and produces about 60 Lumens per Watt or about 2100 Lumens. That is a nice amount of light.
I got this online. It is an average.
If your LED light strip has 30 LEDs per meter (yard) then it uses about 7 watts per meter (yard)
If it has 60 LEDs per meter then double that = 14.
120 LEDs per meter then again double that = 28.
A 15 foot LED light strip is about 5 yards so it uses about 35 watts of power and produces about 60 Lumens per Watt or about 2100 Lumens. That is a nice amount of light.
-
- Posts: 1
- Joined: Tue Oct 13, 2015 8:38 pm
Re: Confusion with LED strips
the left over strip can be used after resoldering new leads on it (you have to cut it in marked sections to do so.
The 16th China International Lighting Fair (Autumn Fair) will be held from 22-26 October, 2015 at the Guzhen Convention and Exhibition Centre in Zhongshan City, Guangdong Province.