Page 1 of 1

Have question about Tab Wire

Posted: Mon May 02, 2016 1:26 pm
by GoldCobra
Hi Guys

I have important question that Im unsure of about Soldering Solar cells.

Im wondering about how much current is able to go through tabbing wire.

Is there a Maxof how much current is allowed to go through tabbing?

I have different tabbing

one is 0.16x1.8

and 0.2x2mm

Any help would be appreciated

Re: Have question about Tab Wire

Posted: Sun Dec 11, 2016 11:15 am
by techman
The tabbing wire sold for solar panels is sufficient for anything you will put together yourself. The solar cells are supposed to be soldered together in series. The tabbing wire will be fine.